| you are here: pro-audio / effects-processors
Equalizers
DBX - dbx231
Dual 31 Band Graphic Equalizer
With a lineage extending back to the revered 12 and 20 Series graphic equalizers, the dbx® 231 easily lives up to the dbx reputation at a price point which can find a home in the tightest of budgets. Besides including two 31-band channels of 1/3-octave equalization, the 231 also offers ±6 or ±12 dB boost/cut range; XLR, 20mm faders and 1/4" inputs; nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quailty componentry is exceptional sound, performance, and reliability.
The 2-Series represents a major step forward in the performance of entry-level graphic equalizers. From its amazing 10Hz to 50kHz frequency response, to its 108dB dynamic range and internal toroidal transformer, the 2-Series offers out of this world specifications with a down to earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the 2-Series is destined to take its rightful place in the lineage of great dbx® signal processors that are the Professional's Choice™. With such affordable quality, there's no longer any excuse for compromising your sound.
Two 31-band, 1/3-octave Constant Q frequency bands
• Switchable boost/cut ranges of ±6 or ±12 dB
• 12dB per octave 40Hz low-cut filter
• Front panel bypass switch
• ±12 dB input gain range
• 4-segment LED ladders for monitoring output levels
• XLR and TRS Inpts and Outputs
• Internal Toroidal Transformer
• Frequency Repsonse of <10Hz to >50kHx
• Dynamic range of greater than 108dB
INPUT
Connectors:
1/4" TRS, female XLR (pin 2 hot)
Type:
Electronically balanced/unbalanced, RF filtered
Impedance:
Balanced 40k ohm, unbalanced 20k ohm
Max Input Level:
>+21dBu balanced or unbalanced
CMRR:
>40dB, typically >55dB at 1kHz
OUTPUTS
Connectors:
1/4" TRS, male XLR (pin 2 hot)
Type:
Impedance-balanaced/unbalanced, RF filtered
Impedance:
Balanced 100 ohm, unbalanced 50 ohm
Max Output Level:
>+21dBu balanced/unbalanced into 2k ohm or greater
>+18dBm balanced/unbalanced (into 600 ohm)
SYSTEM PERFORMANCE
Bandwidth:
20Hz to 20kHz, +0.5/-1dB
Frequency Response:
<10Hz to >50kHz, +0.5/-3dB
Dynamic Range:
108dB
Signal-to-Noise:
90dB
THD+Noise:
<0.004%
Interchannel Crosstalk:
<-80dB, 20Hz to 20kHz
FUNCTION SWITCHES
EQ Bypass:
Bypasses the graphic equalizer section in the signal path
Low Cut:
Activates the 50Hz 12dB/octave high-pass filter
Range:
Selects either +/- 6dB or +/- 12dB slider boost/cut range
POWER SUPPLY
Operating Voltage:
100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60Hz
Power consumption:
15W
Main Connection:
IEC receptacle
Free shipping excluded for International orders and orders shipping to HI,AK,PR
Availability: In Stock
|
