| you are here: pro-audio / effects-processors
Speaker Management and Processing
DBX - driverack-px
dbx DRIVERACK-PX Powered Speaker Optimizer (Up to $500 CASH BACK on over 150 AKG, Crown, dbx, JBL, Lexicon & Soundcraft Products!)
Powered speakers are a beautiful thing. Everything you need bundled into one simple, tidy, portable package. Just grab ‘em and go, right? Well, you may think your powered speaker system is complete, but you’re missing half the picture. DriveRack PX is the other half. In another dbx industry first, we’ve created a processor specifically tailored for powered speakers. Utilizing our highly-acclaimed DriveRack technology, the PX picks up where your powered speakers leave off.
The DriveRack PX Powered Speaker Optimizer has everything you need to get the most out of your stereo powered speaker system. It even includes stereo or mono subwoofer support. With the included dbx M2 measurement mic, Auto-EQ corrects for audible deficiencies in the room environment. Our patented Advanced Feedback Suppression (AFS™) kills nasty feedback, allowing problem-free operation at higher sound levels, while our patented Subharmonic Synthesizer™ extends bass response for enhanced bottom end. With all that, you also get classic dbx compression and the protection offered by our graceful PeakStopPlus™ limiting. Your ears, your audience, and your powered speakers will forever thank you.
In spite of all that sophistication, rest assured we won’t overcomplicate the simplicity of your rig. Our exclusive Setup, Auto-EQ, and AFS Wizards, and out-of-the-box support for a host of JBL and other popular powered speakers, make setup a snap. Louder, cleaner, better sound than you thought possible from your powered speakers.
Features
Stereo Feedback Elimination with 12 feedback notch filters
Dual 28-band Graphic EQ
Classic dbx® Compressor
120A Subharmonic Synthesizer
Stereo Multi-band Parametric EQ
Stereo PeakStopPlus™ Limiters
Pink Noise Generator
Auto-EQ with 28-Band RTA
JBL® and other popular powered speakers included in Setup Wizard
dbx M2 Measurement Mic and zippered pouch included
Front panel RTA-Mic XLR input with phantom power
25 User Programs / 25 Factory Programs
2 Channel XLR Input
2 Channel XLR Output
2 Channel XLR Sub Output
24-Bit ADC/24-Bit DAC, >110 dB Dynamic Range
dbx Type IV™ Conversion System
Full Graphic LCD Display
Analog Inputs
Number of Inputs: 2 (stereo) Line inputs; 1 RTA Mic input
Connectors: 2 Female XLR line inputs; 1 XLR RTA Mic input
Type: Electronically balanced, RF filtered
Impedance: >40k ohms
Maximum Input Line Level: +20dBu
Input CMRR: >45dB
RTA Mic Phantom Voltage: +15VDC
RTA Mic EIN: >-110dBu, 22Hz-22kHz, 150 ohms
Analog Outputs
Number of Outputs: 2 (stereo) Line outputs; 2 Sub outputs (mono or stereo)
Connectors: Male XLR Line outputs; 2 Male XLR Sub outputs
Type: Electronically balanced, RF filtered
Impedance: 120 ohms
Max Output Level: +20dBu
A/D Performance
Type: dbx Type IV Conversion System
Dynamic Range Line: >110dB A-weighted, 107dB unweighted
Type IV Dynamic Range: 123dB with transient material, A-weighted, 22kHz BW; 121dB with transient material, unweighted, 22kHz BW; 115dB typical with program material, A-weighted, 22kHz BW
Sample Rate: 48kHz
D/A Performance
Dynamic Range: 112dB A-weighted; 110dB unweighted
System Performance
Dynamic Range: 110dB A-weighted; >107dB unweighted
THD+N: 0.002% typical at +4dBu, 1kHz, 0dB input gain
Frequency Response: 20Hz-20kHz, +/-0.5dB
Interchannel Crosstalk: <-110dB, 120dB typical
Crosstalk Input to Output: <-100dB
Free shipping excluded for International orders and orders shipping to HI,AK,PR
Availability: In Stock
|
