| you are here: pro-audio / power-amps
Crown CTs Series
Crown - cts2000
2-channel Power Amplifier, 2000 Watts
Building on the foundation of the Com-Tech Series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements.
Features
High power density in a 2RU chassis
Crown Switching Power Supply for lighter weight
Selectable "Constant-Voltage" or low-impedance (4/8ohm) operation per channel
100V direct outputs
Legendary Crown class-I (BCA) and AB+B outputtopologies offer the best in amplifier reliability
Comprehensive array of indicators provide accuratediagnostics
Fully PIP2-compatible
HiQnet compatible
Power Output
Dual mode, 2, 4 or 8 ohms: 1000W
Dual mode, 16 ohms: 625W
Dual mode, 70V or 100V: 1000W
Bridge mode: 2000W
Specifications
Frequency Response (at 1 watt, 20Hz-20kHz): +/-0.25dB
Signal to Noise Ratio below rated power (20Hz to20kHz): 105dB A-weighted
Total Harmonic Distortion (THD) at full rated power,from 20Hz to 20kHz: <0.35%
Damping Factor: 10Hz to 100Hz: >3000
Crosstalk (below rated power, 20Hz to 1kHz): >80dB
Common Mode Rejection (CMR, 20Hz to 1kHz): 50 dB
DC Output Offset: <2mV
Input Impedance (nominal): 10 kilohms balanced, 5kilohms unbalanced
Maximum Input Level: +20dBu before input compression,+32dBu absolute maximum
Load Impedance (safe with all types of loads):Stereo: 2/4/8/16 ohms, 70V, 100V. Bridge Mono: 4/8/16 ohms, 140V, 200V
Voltage Gain (at maximum level setting): 8/4 ohmoperation, 1.4V sensitivity: 63.9:1 (36dB)
Cooling: Continuously variable speed forced air,front-to-back airflow
Dimensions (W x H x D): 19" x 3.5" x 14.25"
Availability: In Stock
|
